Verify LED & Secure Device - Volvo Truck

Plug device into remaining end of the harness.

Start Vehicle.

Verify LED pattern.

The device emits 2 quick beeps every 60 seconds during set-up. Once all three LEDs turn solid you will hear 10 quick beeps.

Secure the device to the harness with included cable tie.

Trim excess cable tie flush.

Every device has a black serialized cable tie included & should be used in this step.

Route device and harness to mounting location as needed.

Ensure cable does not interfere with any moving parts.

Secure harness as needed with cable ties.

Secure device using 2 cable ties.

To ensure reporting quality the device must be secured with no free movement!

To ensure reporting quality the bottom of the device must have line of sight to the sky!