v1.6

Minor Versionm

by Alkesh Dhak

ACE Chlorobite

Written By: Alkesh Dhak (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Sections

1

    • ACE Chlorobite controllers must be version 3.0 and have the 15430-1 emulation module.

    • Earlier models, or those without the 15430-1 module can be upgraded by contacting ACE Electronics.

    • The HRN-FAI cable must be used to prevent equipment damage. The ACE com port has +12V on pins 1 and 9. Do not use a standard straight cable!

  3. The IOX-WRKS primary port connects (19200 baud) to the serial port on the ACE Infobite with the HRN-FAI cable. The IOX-WRKS primary port connects (19200 baud) to the serial port on the ACE Infobite with the HRN-FAI cable.

    • The IOX-WRKS primary port connects (19200 baud) to the serial port on the ACE Infobite with the HRN-FAI cable.

    • Ensure the IOX-WRKS has the correct controller configuration loaded before proceeding to verification / simulation mode.

Finish Line

Author

with 1 other contributor

Alkesh Dhak

Member since: 04/07/2022

39 Guides authored

Team

Authors: Field Service Install Member of Authors: Field Service Install

3 Members

41 Guides authored