Support
For features, technical specs, and troubleshooting, see the HRN-IOXEXT-A.
Best Practices
Extension harness for IOX hardware. Cable length is 2 meters (79 inches). TAA Compliant.
Extension cable that connects IOX hardware on one end, and the GO device on the other to prevent interference and minimize obstruction. Can also be used to connect two IOX devices.
For daisy chain configurations, do not exceed the following maximums:
| # of HRN-IOXEXT cables used | Max quantity of IOX devices supported |
| 1 | 5 |
| 2 | 2 |
WARNING! Read important related Safety Information and Limitations of Use following these installation instructions. The GO device must be disconnected from the vehicle prior to harness/IOX installation.
Post harness/IOX installation, connect the GO device, read and follow all instructions and warnings to prevent serious injury and/or vehicle damage.